FELCO Tool
FELCO Tool
  • 252
  • 1 715 129

Відео

How to change the shock absorbers on your FELCO lopperHow to change the shock absorbers on your FELCO lopper
How to change the shock absorbers on your FELCO lopper
Переглядів 4316 місяців тому
What you'll need: - A new spare part 220/10 - A flathead screwdriver Instructions: 1. With the help of a flathead screwdriver, press against the edges of the shock absorber and then pull it off 2. Using a screwdriver, patiently insert the new shock absorber following a circular motion
How to clean and service your FELCO 211 LopperHow to clean and service your FELCO 211 Lopper
How to clean and service your FELCO 211 Lopper
Переглядів 7416 місяців тому
What you'll need: - A allen key nr 4 - A 8 mm wrench - A dry rag - Scotch-Brite - FELCO 990 grease - FELCO 903 Sharpener - FELCO 980 protective spray Instructions: 1- Disassemble your tool 2- Clean all parts with a dry rag 3- Scrub each part carefully with scotch brite 4- Add FELCO 990 grease on to the counter blade 5- Reassemble your tool 6- Adjust your tool 7- Sharpen your tool: Place the sha...
How to unlock a stuck FELCO rotating handleHow to unlock a stuck FELCO rotating handle
How to unlock a stuck FELCO rotating handle
Переглядів 3846 місяців тому
What you'll need: - Scotch Brite - A dry rag - Lubricating oil (sewing machine oil) Instructions: 1- Remove the handle 2- Scrub carefully the rotating handle axle with scotch brite 3- Clean the axle with a dry rag 4- Lubricate the small sphere placed towards the tip of the axle 5- Insert the handle again
How to clean your FELCO 231 loppersHow to clean your FELCO 231 loppers
How to clean your FELCO 231 loppers
Переглядів 6036 місяців тому
What you'll need: - A 13 mm wrench - A dry rag - Scotch-Brite - FELCO 990 grease - FELCO 903 Sharpener - FELCO 980 protective spray Instructions: 1- Disassemble your tool 2- Clean all parts with a dry rag 3- Scrub each part carefully with scotch brite 4- Add FELCO 990 grease on the anvil blade 5- Reassemble your tool 6- Adjust your tool 7- Sharpen your tool: Place the sharpener while maintainin...
How to sharpen a FELCO pruning shears for left-handedHow to sharpen a FELCO pruning shears for left-handed
How to sharpen a FELCO pruning shears for left-handed
Переглядів 6596 місяців тому
What you'll need: - A FELCO 903 sharpener Instructions: 1- Sharpen your tool: Place the sharpener while maintaining a 23-degree angle on the edge side of the blade and make circular motions from the base of the blade toward the tip. Place the sharpener on the other side of the blade maintaining a 5-degree angle, to remove the burr
How to change the coating on your FELCO pruning shearHow to change the coating on your FELCO pruning shear
How to change the coating on your FELCO pruning shear
Переглядів 9586 місяців тому
What you'll need: - A new spare handle grip - Proctective gloves - A cutter - Sandpaper - Some hot water (100°/212 °F) - Quick drying glue for metals - A flathead screwdriver Instructions: 1. Wear protective gloves 2. Remove the old red coating with the help of a cutter 3. If any residue remains, remove it with the sandpaper 4. To increase the grip of the surface use a file 5. Prepare some hot ...
How to fix a falling FELCO rotating handleHow to fix a falling FELCO rotating handle
How to fix a falling FELCO rotating handle
Переглядів 5826 місяців тому
What you'll need: - A pipe wrench - A dry rag - Spare part 7/23 (rotating handle axle) Instructions: 1- Remove the handle 2- Unscrew the old rotating handle axle and replace it with the new one (pay attention not to damage the surface of the axle by protecting it with a rag while tightening 3- Lubricate the small sphere placed towards the tip of the axle 4- Insert the handle again
How to change the blade of your FELCO folding sawHow to change the blade of your FELCO folding saw
How to change the blade of your FELCO folding saw
Переглядів 2266 місяців тому
What you'll need: - Phillips screwdriver nr 1 - A spare part 602/3 Instructions: 1- Disassemble the old blade using a Phillips screwdriver 2- Replace the old blade with the new blade 3- Adjuste the blade
How to clean your FELCO 630 sawHow to clean your FELCO 630 saw
How to clean your FELCO 630 saw
Переглядів 2256 місяців тому
What you'll need: - FELCO 981 cleaning spray - A dry rag Instructions: 1- Spray both sides with the FELCO 981 cleaning spray and wait 1 minute. 2- Use the dry rag to clean the blade
How to clean and service a FELCO Rotating handle pruning shearsHow to clean and service a FELCO Rotating handle pruning shears
How to clean and service a FELCO Rotating handle pruning shears
Переглядів 7466 місяців тому
What you'll need: - FELCO 905 multifunctional sharpener - A dry rag - Scotch-Brite - FELCO 990 grease - Adjustement key 2/30 - Lubricating oil (sewing machine oil) - FELCO 980 protective spray Instructions: 1- Disassemble your tool 2- Clean all parts with a dry rag 3- Scrub each part carefully with scotch brite 4- Add some FELCO 990 grease on the blade and counter blade 5- Reassemble your tool ...
How to change blade of you FELCO sawHow to change blade of you FELCO saw
How to change blade of you FELCO saw
Переглядів 826 місяців тому
What you'll need: - Phillips screwdriver nr 1 - A spare part 630/3 Instructions: 1- Disassemble the old blade using a Phillips screwdriver 2- Replace the old blade with the new blade
How to clean and service your FELCO 4 pruning shearsHow to clean and service your FELCO 4 pruning shears
How to clean and service your FELCO 4 pruning shears
Переглядів 9156 місяців тому
What you'll need: - A 14 mm wrench - A 13 mm wrench - A dry rag - Scotch-Brite - FELCO 990 grease - Lubricating oil (sewing machine oil) - FELCO 980 protective spray Instructions: 1- Disassemble your tool 2- Clean all parts with a dry rag 3- Scrub each part carefully with scotch brite 4- Add FELCO 990 grease on to the counter blade 5- Reassemble your tool 6- Adjust your tool: Keep wrench 14 ste...
How to clean and service your FELCO 31 pruning shearsHow to clean and service your FELCO 31 pruning shears
How to clean and service your FELCO 31 pruning shears
Переглядів 8816 місяців тому
What you'll need: - A 14 mm wrench - A 13 mm wrench - A dry rag - Scotch-Brite - FELCO 990 grease - Lubricating oil (sewing machine oil) - FELCO 980 protective spray Instructions: 1- Disassemble your tool 2- Clean all parts with a dry rag 3- Scrub each part carefully with scotch brite 4- Add FELCO 990 grease on to the counter blade 5- Reassemble your tool 6- Adjust your tool To check whether th...
How to clean your FELCO 602 folding sawHow to clean your FELCO 602 folding saw
How to clean your FELCO 602 folding saw
Переглядів 2946 місяців тому
What you'll need: - FELCO 981 cleaning spray - A dry rag Instructions: 1- Spray both sides with the FELCO 981 cleaning spray and wait 1 minute. 2- Use the dry rag to clean the blade
How to change the shock absorbers on your FELCO pruning shearsHow to change the shock absorbers on your FELCO pruning shears
How to change the shock absorbers on your FELCO pruning shears
Переглядів 6866 місяців тому
What you'll need: - A new spare part 2/18 and 2/20 - A FELCO pocket knife - A flathead screwdriver Instructions: 1. Disassemble your tool 2. Remove the shock absorber always with the help of a screwdriver (Be careful not to drop the ring inside the insert) 3. With the help of a pocket knife, press against the edge of the bumper and then pull it off with a screwdriver 4. Insert the new bumper 5....

КОМЕНТАРІ

  • @hwonc5387
    @hwonc5387 6 днів тому

    Dont buy a pole

  • @juanpeucon2391
    @juanpeucon2391 9 днів тому

    Hola . cuanto cuesta la tijera a bateria .felco 820

  • @nancimoll9901
    @nancimoll9901 12 днів тому

    This was the best video ever! Feel very confident now. Music isn’t that bad and if you are like the other commenter, then mute it.

  • @joanneisham2016
    @joanneisham2016 21 день тому

    You saved me so much time and frustration. Thank you.

  • @joanneisham2016
    @joanneisham2016 21 день тому

    OMG~ This is the BEST explanation of all the crazy numbering and sizing and usage. Thank you soooooo much!

  • @pamelah6431
    @pamelah6431 24 дні тому

    Why the terrible noise music?

  • @pamelah6431
    @pamelah6431 24 дні тому

    This music is terrible. Great tool, though.

  • @pamelah6431
    @pamelah6431 25 днів тому

    Pretty sure Felco 2 is their #1. I'm so used to it that I worry I'd have a hard time getting used to another model.

  • @pamelah6431
    @pamelah6431 27 днів тому

    Thanks for the visual. The "music" is terrible, though. 😂

  • @martins4936
    @martins4936 29 днів тому

    Hi, I been looking at felco and what would you recommend for hard wood and ivy around tree's as well as Brambles?

  • @user-uf3xy8yn9z
    @user-uf3xy8yn9z Місяць тому

    Thank you for demonstrating so well with tools that actually were rusty and dirty!

  • @yuriyur7789
    @yuriyur7789 Місяць тому

    I have several Felco. Very good tools!

  • @Peter12029
    @Peter12029 Місяць тому

    I'm a felco convert from Fiskars and other cheap Big box store junk but I'm not going to buy special lube and special cleaning for every single individual tool that I own so what common household items can I use ??? 3in1 oil or w 40 remove sap in silicone grease.for lubrication

  • @carolyncoppola974
    @carolyncoppola974 2 місяці тому

    I have been trying to sharpen my Fiskars and nothing is small enough to get in the narrow part of the blade and I cannot find any instructions on how to disassemble it. You just sold me on Felco 2 pruners! Thank you so much!

    • @pamelah6431
      @pamelah6431 27 днів тому

      Fiskars & Felcos are a mile apart. You're much better off with the #2 Felco. I've had the same pair on my hip for 5 years and it's never let me down. :)

  • @RosetreeDogTraining
    @RosetreeDogTraining 2 місяці тому

    if that is such a common question maybe you should make it easier to figure out

  • @Yana-zg7fr
    @Yana-zg7fr 2 місяці тому

    how are they different from each other, for example how do I know which one is best for my felco 14? If i were to just buy one, which one would be the best one for me to get? Also I noticed you didn't include the felco 904 sharpener.

    • @luticpagan3549
      @luticpagan3549 13 днів тому

      отличный вопрос. могли бы уже и ответить. тем более что есть еще и 906 точилка. у меня 905 - нравится

  • @lolo_persian
    @lolo_persian 2 місяці тому

    I love my Felco #14. It’s a pruner would last rest of my life, top notch quality.

  • @SergZatochka124
    @SergZatochka124 2 місяці тому

    Ооо пример как нельзя точить 🤦 с обратной стороны не надо 10 градусов

  • @jbuitendam9236
    @jbuitendam9236 3 місяці тому

    Jammer blablabla

  • @Plesk90
    @Plesk90 3 місяці тому

    Thanks really clear and helpful, I went for the F6 as my hand measure about 19,5 cm, waiting for them to be delivered

  • @DeeAnnKjelshusJohnson
    @DeeAnnKjelshusJohnson 3 місяці тому

    This was super helpful. Thank you!!

  • @gfccatt
    @gfccatt 3 місяці тому

    Bravissima perfetto grazie ❤

  • @Barjeenegi83
    @Barjeenegi83 3 місяці тому

    I want felco 3 pair parts

  • @jaapaap123
    @jaapaap123 3 місяці тому

    How does this work on a model 2?

  • @zamaneee
    @zamaneee 3 місяці тому

    😊 felco 4 alacağım büyük ihtimalle

  • @Roger-yc5fg
    @Roger-yc5fg 3 місяці тому

    I love my Felco secateurs too. I look after them always.

  • @luticpagan3549
    @luticpagan3549 3 місяці тому

    а зачем второе карбидное полотно в 905? и зачем пырскали дезодорантом?

  • @luticpagan3549
    @luticpagan3549 3 місяці тому

    ну и нахера смазка под лезвие с той стороный где нет соприкосновения? дороговаты тряпочки для протирки то

    • @pamelah6431
      @pamelah6431 27 днів тому

      Use a shop towel, then... Also, the oil helps keep rust off, not just lubricate.

  • @jvhobson
    @jvhobson 4 місяці тому

    The rubber WILL NOT BUDGE! ,,,useless video

  • @thangnguyen-zq6iu
    @thangnguyen-zq6iu 4 місяці тому

    Những chiếc kéo cắt thật vĩ đại❤

  • @ErhardFrebold
    @ErhardFrebold 4 місяці тому

    Hahaha! Well, I couldn't get them to tighten at all, and then the main pivot bolt sheared right off.

  • @Fegyo98
    @Fegyo98 4 місяці тому

    really good tool!

  • @Fegyo98
    @Fegyo98 4 місяці тому

    this is the song of some porn videos advert :DDD ehhh. btw really thanks i wanted to see few tips :)

  • @user-ti4qr8cl1o
    @user-ti4qr8cl1o 4 місяці тому

    أسباب عند ما قفل ‏‪0:33‬‏ على الغصن الحطب الشجرة يوجد فراغ في المقص الزبر.....

  • @NoahDeer
    @NoahDeer 4 місяці тому

    Why not use wd40?

  • @vanderliehing5523
    @vanderliehing5523 4 місяці тому

    A tesoura é ótima, mas achar peça de reposição e um parto. Pagar 500,00 numa tesoura dessa e depois não ter peça pra manutenção é um desrespeito com o consumidor

  • @sylvie69860
    @sylvie69860 4 місяці тому

    Merci pour les cours de taille de Stéphane toujours aussi jovial

  • @ivicasvilicic2325
    @ivicasvilicic2325 5 місяців тому

    Hi. Do you need to soak the ceramic stone 902 ?

  • @ivicasvilicic2325
    @ivicasvilicic2325 5 місяців тому

    Hi. Nobody stocks the 981 spray. Is there an alternative ?

  • @MariaNichifor-ci6vx
    @MariaNichifor-ci6vx 5 місяців тому

    Vriau sa cupar

  • @meltemkw
    @meltemkw 5 місяців тому

    So helpful! Thank you!

  • @piezoman79
    @piezoman79 5 місяців тому

    I’ve never understood why someone going to the trouble of trying to make counterfeit products (to include stamping the name on it) doesn’t actually copy to original. 🤷🏻‍♂️

  • @giovanniscibetta4087
    @giovanniscibetta4087 5 місяців тому

    Come mettere l'anello del mortizzatore

  • @andrewgreen1940
    @andrewgreen1940 5 місяців тому

    This is a useless b******* video the handles don't come off they get stuck completely mine is in a vice but nothing is shifting it.

  • @insidegone949
    @insidegone949 6 місяців тому

    Available in India?

  • @xabiertown
    @xabiertown 6 місяців тому

    👍

  • @xabiertown
    @xabiertown 6 місяців тому

    👍

  • @martinfernandes4941
    @martinfernandes4941 6 місяців тому

    Hi, Please help me on how can I order your Falco Tools in India.

  • @tonyahatch1400
    @tonyahatch1400 6 місяців тому

    Laura, I know this is an old video, but for the first time today, while referencing this video, I took apart my Felcos and cleaned and sharpened them all by myself! 💪 I don’t know why I’m so crazy proud of this, but thank you for being an amazing resource! 💚

    • @mariap.894
      @mariap.894 4 місяці тому

      I'm frightened to take mine apart😮😬😵‍💫

  • @user-mn3wj7ey6x
    @user-mn3wj7ey6x 6 місяців тому

    👌